PIC24HJ128GP510-I/PT
| Parameters | |
|---|---|
| Width | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ128GP510 |
| Pin Count | 100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Nominal Supply Current | 38mA |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 16b |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 32 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
PIC24HJ128GP510-I/PT Overview
There is a 100-TQFP package available to save space. Surface Mount is used for mounting. It comes in a Tray package. The device runs in PIC core processor. Working at -40°C~85°C TA temperature is recommended. It has a type of program memory of FLASH. 85 I/Os have been provided by the device. A component with the same part number as PIC24HJ128GP510 can be compared to other similar components. At QUAD, it has its terminals. This circuit consists of 100 terminationals. This electrical component is part of the PIC? 24H series. Using the 3.3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A total of 100 pins are used in its construction. A method of mounting is used, which is Surface Mount. In total, it has 100 pins. Microcontrollers contains this component. Data and programs may be stored on the devices which have a memory size of 128kB. Power is provided by a source of 3.3V. It is highly efficient when it works at a frequency of 40MHz. The number of timers and counters is 9. It is part of the PIC CPU family. For normal operation, the supply voltage (Vsup) should be kept above 3V. Using an oscillator type of Internal, it works.
PIC24HJ128GP510-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ128GP510-I/PT Applications
There are a lot of Microchip Technology PIC24HJ128GP510-I/PT Microcontroller applications.
- Equipment control
- Heater/Fan
- Laminators
- Industrial robot
- Fire detection & safety devices
- Blood pressure monitors
- DVD\DV\MP3 players
- Fax machines
- Teletext terminals
- DCS control intelligent sensor
