PIC24HJ128GP510T-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ128GP510 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 13 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24HJ128GP510T-I/PF Overview
For the purpose of saving space, it is available in the 100-TQFP package. Mounted using Surface Mount. Tape & Reel (TR) is the package that contains it. Devices with PIC core processors are available. In order to work effectively, the temperature should be kept at -40°C~85°C TA. Its type of program memory is FLASH. There are 85 I/Os on the board. To find comparable components, use the PIC24HJ128GP510 base part number. At QUAD, it has its terminals. As far as terminations are concerned, there are 100 terminations present. An electrical component such as this is included in the series PIC? 24H. Using the 3.3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. 100 pins are used to construct it. According to Surface Mount, it is mounted. Total number of pins is 100. This is a component included in Microcontrollers. In the device, there is a memory capacity of 128kB which may be used to store programs and data. The maximum supply current is set at 90mA. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. 3.3V offers full adaptability and voltage supply when it is employed by designers. 13 counters/timers are currently active. It is a member of the PIC family of CPUs. There is an oscillator type Internal used in this circuit.
PIC24HJ128GP510T-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ128GP510T-I/PF Applications
There are a lot of Microchip Technology PIC24HJ128GP510T-I/PF Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Electrocardiogram (EKG)
- Toasters
- Hearing aids
- Fire alarms
- Glucose monitoring systems (for Type 1 Diabetes)
- Smart highways (navigation, traffic control, information monitoring and car service)
- Leakage current tester
- Computer/laptop
- Data acquisition and control
