PIC24HJ256GP610T-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ256GP610 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Speed | 32 MHz |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b, 32x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| ROM (words) | 262144 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24HJ256GP610T-I/PF Overview
For the purpose of saving space, it is available in the 100-TQFP package. In this case, it is mounted using the method of Surface Mount. A package of Tape & Reel (TR) contains it. It is equipped with a PIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 85 I/Os on the board. A comparable component can be found by using the base part number PIC24HJ256GP610. The position of the device is QUAD at terminal. This circuit consists of 100 terminationals. The electrical component is part of the series PIC? 24H. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A number of 100 pins are used to construct it. This mount is done in accordance with the method of Surface Mount. It has a total of 100 pins on it. Microcontrollers contains this component. Memory size for the devices is 256kB, which can be used to store programs and data. It performs extremely well at a frequency of 40MHz. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 9 timers/counters are present. PIC CPUs are included in this part. Internal is the oscillator type it uses.
PIC24HJ256GP610T-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ256GP610T-I/PF Applications
There are a lot of Microchip Technology PIC24HJ256GP610T-I/PF Microcontroller applications.
- Heater/Fan
- Dishwashers
- Removable disks
- Sonography (Ultrasound imaging)
- Toasters
- Calculator
- Air fryers
- Digital set-top boxes
- Data acquisition and control
- Virtual reality VR robots
