PIC24HJ32GP202T-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ32GP202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Supply Current-Max | 75mA |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24HJ32GP202T-I/SO Overview
Due to its space-saving qualities, it is available in the 28-SOIC (0.295, 7.50mm Width) package. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Tape & Reel (TR). There is a PIC as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. Its type of program memory is FLASH. The device has 21 I/Os. To find equivalent components, use its PIC24HJ32GP202 base part number. The position of the device is DUAL at terminal. As far as terminations are concerned, there are 28 terminations present. An electrical component such as this is included in the series PIC? 24H. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. It is constructed using 28 pins. The mounting of this device is carried out following the method of Surface Mount. There are 28 pins on it. It is one of the components included in Microcontrollers. Data and programs may be stored on the devices which have a memory size of 32kB. Supply current is maximum at 75mA. It is highly efficient when it works at a frequency of 40MHz. Designers can fully utilize the supply voltage of 3.3V's adaptability while employing it. A total of 3 timers/counters have been set up. As part of the PIC CPU family, this component is included. Using a Internal oscillator type, it works well.
PIC24HJ32GP202T-I/SO Features
28-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ32GP202T-I/SO Applications
There are a lot of Microchip Technology PIC24HJ32GP202T-I/SO Microcontroller applications.
- Food and beverage
- Firewalls
- DCS control intelligent sensor
- Printers
- 3D printers
- Washing machine
- Guidance-GPS
- Ipad
- Smart highways (navigation, traffic control, information monitoring and car service)
- Refrigerators
