PIC24HJ32GP302-E/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100, PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ32GP302 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 11K x 24 |
| Connectivity | I2C, PMP, SPI, UART/USART |
| Supply Current-Max | 76mA |
| Bit Size | 16 |
| Data Converter | A/D 10x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 32768 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC24HJ32GP302-E/MM Overview
Due to its space-saving qualities, it is available in the 28-VQFN Exposed Pad package. A Surface Mount mounting method is used. There is a Tube package available for it. There is a PIC as core processor in this device. When working, the temperature should be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. It has a number of 21I/Os. Other components that are comparable to it have the base part number PIC24HJ32GP302. The terminals of this device are set to QUAD. Currently, it consists of 28 terminationals. The Automotive, AEC-Q100, PIC? 24H series contains this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A total of 28 pins are required to construct this device. The method of Surface Mount is used to mount it. On it, there are 28 pins. This is a component included in Microcontrollers. The devices have a maximum memory size of 32kB that can be used to store programs and data. The maximum supply current is set at 76mA. The system is highly efficient when working at a frequency of 40MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. A total of 5 timers/counters are present. It is a member of the PIC family of CPUs. Using an oscillator type of Internal, it works.
PIC24HJ32GP302-E/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ32GP302-E/MM Applications
There are a lot of Microchip Technology PIC24HJ32GP302-E/MM Microcontroller applications.
- Medical instruments chromatographs
- Accu-check
- Answering machines
- Paper shredders
- Missile control
- Electronic jamming systems
- Printers
- Hand-held metering systems
- Hearing aids
- Microwave ovens
