PIC24HJ64GP210-I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 24H |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC24HJ64GP210 |
| Pin Count | 100 |
| Lead Pitch | 650μm |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 8K x 8 |
| Memory Type | FLASH, SRAM |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 512 kb |
| ROM (words) | 65536 |
| CPU Family | PIC |
| Number of ADC Channels | 32 |
| Number of PWM Channels | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC24HJ64GP210-I/PF Overview
Due to its space-saving qualities, it is available in the 100-TQFP package. Surface Mount is the way to mount it. You can find it in the package of Tray. There is a PIC as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 85 I/Os on it. A comparable component can be found by using the base part number PIC24HJ64GP210. QUAD is the position of its terminals on the board. There are a total of 100 terminations in it. The PIC? 24H series contains this electrical component. Using the 3.3V supply voltage allows for high efficiency. For data storage, FLASH, SRAM is used as its memory type. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 100 pins are required to construct this device. Based on the Surface Mount method, it is mounted. A total of 100 pins are attached to it. Subcategory Microcontrollers includes this component. It is possible to store programs and data on the devices, as they have a memory size of 64kB. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. It appears that there are 9 timers/counters in use. PIC CPUs are included in this part. Using a Internal oscillator type, it works well.
PIC24HJ64GP210-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC24HJ64GP210-I/PF Applications
There are a lot of Microchip Technology PIC24HJ64GP210-I/PF Microcontroller applications.
- Scanners
- Ipod
- Food and beverage
- Temperature sensing and controlling devices
- Binding machines
- Television
- Industrial robot
- Wastewater treatment
- 3D printers
- Set-top boxes
