PIC32MX110F016CT-I/TL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-VFTLA Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® 32MX |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX110F016C |
| Pin Count | 36 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Supply Current-Max | 30mA |
| Bit Size | 32 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 16384 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of UART Channels | 2 |
| Height Seated (Max) | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX110F016CT-I/TL Overview
For the purpose of saving space, it is available in the 36-VFTLA Exposed Pad package. Surface Mount is used for mounting. It is available in the Tape & Reel (TR) package. The device has a MIPS32? M4K? core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. It has a number of 25I/Os. Other components that are comparable to it have the base part number PIC32MX110F016C. QUAD is the position of its terminals on the board. 36 terminations are present in it. It is a member of the PIC? 32MX series of electrical components. As a result of the 3.3V supply voltage, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 36 pins are used to construct it. Based on the Surface Mount method, it is mounted. Total number of pins is 36. This component is a part of Microcontrollers. The devices have a maximum memory size of 16kB that can be used to store programs and data. A core architecture of PIC is used. The maximum supply current is set at 30mA. It is highly efficient when it works at a frequency of 40MHz. It appears that there are 5 timers/counters in use. CPU family PIC comprises the part. The oscillator type Internal is used to operate the device.
PIC32MX110F016CT-I/TL Features
36-VFTLA Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX110F016CT-I/TL Applications
There are a lot of Microchip Technology PIC32MX110F016CT-I/TL Microcontroller applications.
- Dryers
- Glucose monitoring systems (for Type 1 Diabetes)
- Paper shredders
- Volt meter
- Guidance-GPS
- Hard drives
- X-ray
- Hand-held metering systems
- Information appliances (networking of household appliances)
- Missile control
