PIC32MX150F128D-50I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX150F128D |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Supply Current-Max | 30mA |
| Bit Size | 32 |
| Data Converter | A/D 13x10b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Screening Level | TS 16949 |
| Number of ADC Channels | 13 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
PIC32MX150F128D-50I/PT Overview
It is available in the 44-TQFP package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. Tray is the package that contains it. Device with MIPS32? M4K? core processor issupported. The temperature should be kept at -40°C~85°C TA while working. There is FLASH program memory in it. 35 I/Os can be found on it. It has a base part number of PIC32MX150F128D that can be used to find other components that are comparable. The terminals of this device are located at QUAD. As far as terminations are concerned, there are 44 terminations present. In the PIC? 32MX series, this electrical component is found. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 44 pins are used in its construction. It is mounted based on the method of Surface Mount. This component is a part of Microcontrollers. In order to store data and programs, the devices have a memory size of 128kB. The architecture of its core is PIC. In this case, 30mA represents the maximum current supply. Using a frequency of 50MHz, it is very efficient. There are 5 timers/counters. The part is a part of the PIC CPU family. Using an oscillator type Internal, it operates.
PIC32MX150F128D-50I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX150F128D-50I/PT Applications
There are a lot of Microchip Technology PIC32MX150F128D-50I/PT Microcontroller applications.
- Electromechanical control
- Digital cameras
- Oil and gas
- Safety -airbags, automatic braking system (ABS)
- Hard drives
- Scanners
- Accu-check
- Tape drives
- Fabric
- Paper shredders
