PIC32MX210F016D-I/ML
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX210F016D |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 33 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART, USB OTG |
| Supply Current-Max | 30mA |
| Bit Size | 32 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 15 |
| ROM (words) | 16384 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of UART Channels | 2 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
PIC32MX210F016D-I/ML Overview
A space-saving advantage is that it is included in the 44-VQFN Exposed Pad package. Surface Mount is used for mounting. There is a Tube package available for it. MIPS32? M4K? core processor is present on the device. In order to work effectively, the temperature should be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 33 I/Os can be found on it. To find comparable components, use the PIC32MX210F016D base part number. A QUAD position is assigned to its terminals. Currently, it consists of 44 terminationals. The electrical component is part of the series PIC? 32MX. The 3.3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 44 pins are required to construct this device. A total of 44 pins are attached to it. This is a component included in Microcontrollers. The devices have a memory size of 16kB that can be used to store programs and data. PIC is its core architecture. Supply current cannot exceed 30mA. The system is highly efficient when working at a frequency of 40MHz. There are currently 15 timers/counters set up on the system. It is a member of the PIC family of CPUs. An oscillator type Internal is required for it to work.
PIC32MX210F016D-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX210F016D-I/ML Applications
There are a lot of Microchip Technology PIC32MX210F016D-I/ML Microcontroller applications.
- X-ray
- Tape drives
- Torpedo guidance
- Routers
- Blenders
- Dialysis machines (performs function of liver)
- Virtual reality VR robots
- Nintendo
- Calculator
- Embedded gateways
