PIC32MX250F128D-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX250F128D |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 33 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 128KB 128K x 8 |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART, USB OTG |
| Supply Current-Max | 30mA |
| Bit Size | 32 |
| Data Converter | A/D 13x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of Programmable I/O | 34 |
| Number of UART Channels | 2 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC32MX250F128D-I/ML Overview
As a result, it is available in the 44-VQFN Exposed Pad package. Surface Mount is the way to mount it. A package of Tube contains it. The device runs in MIPS32? M4K? core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 33 I/Os on the board. A component with the same part number as PIC32MX250F128D can be compared to other similar components. The terminals of this device are located at QUAD. Currently, it consists of 44 terminationals. The electrical component is part of the series PIC? 32MX. The supply voltage of 3.3V allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. A total of 44 pins are required to construct this device. There are 44 pins on it. It is one of the components included in Microcontrollers. In the device, there is a memory capacity of 128kB which may be used to store programs and data. PIC is its core architecture. Supply current cannot exceed 30mA. Working at a frequency of 40MHz results in excellent efficiency. A total of 5 timers/counters have been set up. This part is an integral part of the PIC CPU family. There are 34 programmable I/Os in the device. Using an oscillator type Internal, it operates.
PIC32MX250F128D-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX250F128D-I/ML Applications
There are a lot of Microchip Technology PIC32MX250F128D-I/ML Microcontroller applications.
- Printers
- Auto-breaking system
- Torpedo guidance
- Smart instruments
- ECG machine
- Guidance-GPS
- Keyboards
- Graphic terminals
- Oil and gas
- Kindle
