PIC32MX270F256B-V/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100, PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIC32MX270F256B |
| Operating Supply Voltage | 3.6V |
| Interface | I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 19 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 9x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 262144 |
| Core Architecture | PIC |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Number of ADC Channels | 10 |
| Length | 34.671mm |
| RoHS Status | ROHS3 Compliant |
PIC32MX270F256B-V/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. Using Through Hole, it is mounted. In the package Tube, it is included. The device runs in MIPS32? M4K? core processor. It is important to keep the temperature at -40°C~105°C TA while working. Its type of program memory is FLASH. The device has 19 I/Os. It has a base part number of PIC32MX270F256B that can be used to find other components that are comparable. The position of the device is DUAL at terminal. A 28 termination is contained within it. The electrical component is part of the series Automotive, AEC-Q100, PIC? 32MX. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. There are 28 pins used in the construction of this device. Data and programs may be stored on the devices which have a memory size of 256kB. PIC is the foundation of its architecture. Using a frequency of 40MHz, it is very efficient. Designers can fully utilize the supply voltage of 3.6V's adaptability while employing it. 5 timers/counters are in use. Internal is the oscillator type it uses.
PIC32MX270F256B-V/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
PIC32MX270F256B-V/SP Applications
There are a lot of Microchip Technology PIC32MX270F256B-V/SP Microcontroller applications.
- Computers and laptops-video calling, email, blogging
- Smoke alarms
- Christmas lights
- Coffee machines
- Copiers
- DCS control intelligent sensor
- Digital TVs
- Missile control
- Smart highways (navigation, traffic control, information monitoring and car service)
- Toasters
