PIC32MX270F512H-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Frequency | 40MHz |
| Base Part Number | PIC32MX270F512H |
| Operating Supply Voltage | 3.6V |
| Interface | I2C, I2S, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 49 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 28x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16 |
| Core Architecture | PIC |
| On Chip Program ROM Width | 32 |
| CPU Family | PIC |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 16384 |
| Number of ADC Channels | 13 |
| Number of External Interrupts | 5 |
| On Chip Data RAM Width | 32 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX270F512H-I/PT Overview
To save space, it is included in the 64-TQFP package. Surface Mount is used for mounting. Package Tray contains it. It is equipped with a MIPS32? M4K? core processor. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. A total of 49 I/Os are available on this device. It has a part number of PIC32MX270F512H that can be used to locate similar components. QUAD is the position of its terminals on the board. This circuit consists of 64 terminationals. The PIC? 32MX series includes this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. It is constructed using 64 pins. A device with a memory size of 512kB can store programs and data. PIC forms the basis of its architecture. This device works well at 40MHz frequency when it is operating at a high rate of efficiency. 3.6V provides an adaptable and voltage-independent supply voltage when it is used by designers. 5 timer/counters are present. As part of the PIC CPU family, this component is included. The oscillator type Internal is used to operate the device.
PIC32MX270F512H-I/PT Features
64-TQFP package
Mounting type of Surface Mount
PIC32MX270F512H-I/PT Applications
There are a lot of Microchip Technology PIC32MX270F512H-I/PT Microcontroller applications.
- Calculator
- Smartphone
- Routers
- Dryers
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Robots
- Ipad
- Smart highways (navigation, traffic control, information monitoring and car service)
- Automatic staplers
- Accu-check
