PIC32MX350F256H-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Base Part Number | PIC32MX350F256H |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, I2S, SPI, UART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Speed | 100 MHz |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, IrDA, LINbus, PMP, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 28x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| On Chip Program ROM Width | 8 |
| CPU Family | PIC |
| Number of UART Channels | 4 |
| Number of ADC Channels | 28 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC32MX350F256H-I/PT Overview
There is a 64-TQFP package available to save space. It is mounted using the way of Surface Mount. It comes in a Tray package. MIPS32? M4K? core processor is present on the device. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. There are 53 I/Os on it. To find comparable components, use the PIC32MX350F256H base part number. The terminals are positioned at QUAD. This circuit consists of 64 terminationals. Part of the PIC? 32MX series, this electrical component is used in a variety of applications. The 3.3V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 64 pins are required to construct this device. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 256kB. In terms of architecture, it is based on PIC. This device works well at 80MHz frequency when it is operating at a high rate of efficiency. The number of timers and counters is 5. As part of the PIC CPU family, this component is included. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.3V. The oscillator type Internal is used to operate the device.
PIC32MX350F256H-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX350F256H-I/PT Applications
There are a lot of Microchip Technology PIC32MX350F256H-I/PT Microcontroller applications.
- Projectors
- Copiers
- Sonography (Ultrasound imaging)
- Virtual reality VR robots
- Gas monitoring systems
- Playstation
- Volt meter
- Electronic jamming systems
- DVD\DV\MP3 players
- Telephone sets
