PIC32MX575F256HT-80I/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX575F256H |
| Pin Count | 64 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, I2C, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, SPI, UART/USART, USB OTG |
| Supply Current-Max | 98mA |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX575F256HT-80I/MR Overview
There is a 64-VFQFN Exposed Pad package available to save space. The way of mounting it is Surface Mount. A package of Tape & Reel (TR) contains it. A core processor of MIPS32? M4K? is present in the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 53 I/Os on the board. Based on the PIC32MX575F256H base part number, it can be compared with other components. The terminals of this device are located at QUAD. It consists of 64 terminationals. An electrical component such as this is included in the series PIC? 32MX. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 64 pins used in the construction of this device. The method of Surface Mount is used to mount it. A total of 64 pins are attached to it. The component is included in Microcontrollers. Memory size for the devices is 256kB, which can be used to store programs and data. There is PIC core architecture for this system. A maximum supply current of 98mA is set. Working at a frequency of 80MHz results in excellent efficiency. It appears that there are 5 timers/counters in use. It is part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) above 2.3V. Internal is the oscillator type it uses.
PIC32MX575F256HT-80I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX575F256HT-80I/MR Applications
There are a lot of Microchip Technology PIC32MX575F256HT-80I/MR Microcontroller applications.
- Information appliances (networking of household appliances)
- Smartphone
- Smart highways (navigation, traffic control, information monitoring and car service)
- Leakage current tester
- Laminators
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Calculators
- Radio
- Answering machines
- Process control devices
