PIC32MX575F256LT-80V/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX575F256L |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, I2C, RS-232, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, I2C, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Core Architecture | PIC |
| Number of Programmable I/O | 5 |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX575F256LT-80V/PF Overview
It is available in the 100-TQFP package for the benefit of saving space. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tape & Reel (TR). Devices with MIPS32? M4K? core processors are available. During work, the temperature should remain at -40°C~105°C TA. Memory type FLASH is used for program memory. The device has 85 I/Os. A component with the same part number as PIC32MX575F256L can be compared to other similar components. QUAD is the position of its terminals on the board. There are a total of 100 terminations in it. In the PIC? 32MX series, this electrical component is found. The 3.3V supply voltage enables high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 100 pins are used in its construction. As a result, it is mounted in accordance with Surface Mount. In total, it has 100 pins. Data and programs can be stored on the devices with a memory size of 256kB. There is PIC core architecture for this system. It performs extremely well at a frequency of 80MHz. There are a total of 5 programmable I/Os. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.3V. Using an oscillator type of Internal, it works.
PIC32MX575F256LT-80V/PF Features
100-TQFP package
Mounting type of Surface Mount
PIC32MX575F256LT-80V/PF Applications
There are a lot of Microchip Technology PIC32MX575F256LT-80V/PF Microcontroller applications.
- Graphic terminals
- Instrument control
- Dryers
- Magnetic resonance imaging (MRI)
- Dialysis machines (performs function of liver)
- Ipad
- Hand-held metering systems
- Entertainment-radios, CD players, televisions
- DVD\DV\MP3 players
- Sonography (Ultrasound imaging)
