PIC32MX575F512LT-80V/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX575F512L |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, I2C, RS-232, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, I2C, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Core Architecture | PIC |
| Number of Programmable I/O | 5 |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX575F512LT-80V/PF Overview
As a result, it is available in the 100-TQFP package. Surface Mount is used for mounting. There is a Tape & Reel (TR) package available for it. There is a MIPS32? M4K? as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~105°C TA. It has a type of program memory of FLASH. There are 85 I/Os on it, which makes it a very simple device. It has a part number of PIC32MX575F512L that can be used to locate similar components. QUAD is the position of its terminals on the board. This circuit consists of 100 terminationals. The PIC? 32MX series contains this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. It is constructed with 100 pins. A method of mounting is used, which is Surface Mount. There are a total of 100 pins on it. Data and programs can be stored on the devices with a memory size of 512kB. PIC is its core architecture. Using a frequency of 80MHz, it is very efficient. 5 is the number of programmable I/O. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.3V. Using oscillator type Internal makes it work.
PIC32MX575F512LT-80V/PF Features
100-TQFP package
Mounting type of Surface Mount
PIC32MX575F512LT-80V/PF Applications
There are a lot of Microchip Technology PIC32MX575F512LT-80V/PF Microcontroller applications.
- DCS control intelligent sensor
- Accu-check
- Binding machines
- Microwave ovens
- Coffee machines
- Nintendo
- Glucose monitoring systems (for Type 1 Diabetes)
- Temperature sensing and controlling devices
- Hand-held metering systems
- Instrument control
