PIC32MX675F256H-80V/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX675F256H |
| Pin Count | 64 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | Ethernet, I2C, RS-232, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | Ethernet, I2C, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Core Architecture | PIC |
| Number of Programmable I/O | 5 |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX675F256H-80V/MR Overview
For space savings, it is available in the 64-VFQFN Exposed Pad package. A Surface Mount mounting method is used. In the package Tube, it is included. A MIPS32? M4K? core processor powers the device. Work should be done at -40°C~105°C TA. It has a type of program memory of FLASH. A total of 53 I/Os are present. A component with the same part number as PIC32MX675F256H can be compared to other similar components. At QUAD, its terminals are located. A 64 termination is contained within it. It is a member of the PIC? 32MX series of electrical components. As a result of the 3.3V supply voltage, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 64 pins are used to construct it. According to Surface Mount, it is mounted. It has a total of 64 pins on it. The devices have a maximum memory size of 256kB that can be used to store programs and data. The core architecture of the system is PIC. At a frequency of 80MHz, it exhibits excellent efficiency. A chip with 5 programmable inputs/outputs is available. Normally, the supply voltage (Vsup) should remain above 2.3V. An oscillator type Internal is required for it to work.
PIC32MX675F256H-80V/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
PIC32MX675F256H-80V/MR Applications
There are a lot of Microchip Technology PIC32MX675F256H-80V/MR Microcontroller applications.
- Calculators
- Digital cameras
- Set-top boxes
- Pacemakers (used to control abnormal heart rhythm)
- Blood pressure monitors
- Hearing aids
- Traditional industrial transformation
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Robots
- Missile control
