PIC32MX675F256LT-80I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX675F256L |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | Ethernet, I2C, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | Ethernet, I2C, SPI, UART/USART, USB OTG |
| Supply Current-Max | 98mA |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX675F256LT-80I/PF Overview
A space-saving advantage is that it is included in the 100-TQFP package. Mounted using Surface Mount. Package Tape & Reel (TR) contains it. The device runs in MIPS32? M4K? core processor. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 85 I/Os have been provided by the device. To find comparable components, use the PIC32MX675F256L base part number. At QUAD, it has its terminals. It consists of 100 terminationals. PIC? 32MX is the series number of this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. 100 pins are used to construct it. A method of mounting is used, which is Surface Mount. In total, it has 100 pins. In the subcategory of Microcontrollers, this component is included. It is possible to store programs and data on the devices, as they have a memory size of 256kB. Its core architecture is based on PIC. It should be noted that 98mA represents the maximum supply current. It is highly efficient when it works at a frequency of 80MHz. 5 timers/counters are in use. This part is part of the PIC family of CPUs. Vsup should be kept above 2.3V for normal operation. An oscillator of type Internal is used.
PIC32MX675F256LT-80I/PF Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX675F256LT-80I/PF Applications
There are a lot of Microchip Technology PIC32MX675F256LT-80I/PF Microcontroller applications.
- Smartphone
- Telephone sets
- Xbox
- DCS control intelligent sensor
- Microwave ovens
- Calculators
- Keyboards
- Electromechanical control
- Heater/Fan
- Set-top boxes
