PIC32MX675F256LT-80I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX675F256L |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | Ethernet, I2C, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | Ethernet, I2C, SPI, UART/USART, USB OTG |
| Supply Current-Max | 98mA |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX675F256LT-80I/PT Overview
It is available in the 100-TQFP package for the benefit of saving space. A Surface Mount mounting method is used. It is available in the Tape & Reel (TR) package. A core processor of MIPS32? M4K? is present in the device. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 85 I/Os are present. To find comparable components, use the PIC32MX675F256L base part number. The position of the device is QUAD at terminal. There are a total of 100 terminations in it. An electrical component such as this is included in the series PIC? 32MX. By using a 3.3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is constructed from 100 pins. Based on the Surface Mount method, it is mounted. In total, it has 100 pins. The component is included in Microcontrollers. In order to store data and programs, the devices have a memory size of 256kB. Its core architecture is based on PIC. 98mA is the maximum supply current. It performs extremely well at a frequency of 80MHz. A total of 5 timers/counters have been set up. It belongs to the PIC CPU family. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.3V. Using an oscillator type Internal, it operates.
PIC32MX675F256LT-80I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX675F256LT-80I/PT Applications
There are a lot of Microchip Technology PIC32MX675F256LT-80I/PT Microcontroller applications.
- DDC control
- Heart rate monitors
- Virtual reality VR robots
- Smoke alarms
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Petrochemical
- Robots
- Aerospace navigation systems
- Digital TVs
- Refrigerators
