PIC32MX695F512H-80V/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX695F512H |
| Pin Count | 64 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | Ethernet, I2C, RS-232, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | Ethernet, I2C, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Core Architecture | PIC |
| Number of Programmable I/O | 5 |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC32MX695F512H-80V/PT Overview
As a result, it is available in the 64-TQFP package. The way of mounting it is Surface Mount. There is a Tray package available for it. There is a MIPS32? M4K? as core processor in this device. Work should be done at -40°C~105°C TA. FLASH has been assigned to it as a program memory. It has a number of 51I/Os. In order to find similar components, it has a base part number of PIC32MX695F512H. The terminals of this device are set to QUAD. 64 terminations are present in it. In the PIC? 32MX series, this electrical component is found. Using the 3.3V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 64 pins are used to construct it. According to Surface Mount, it is mounted. A total of 64 pins are attached to it. The devices have a memory size of 512kB that can be used to store programs and data. A core architecture of PIC is used. It is highly efficient when it works at a frequency of 80MHz. The number of programmable inputs and outputs is 5. Vsup should be kept above 2.3V for normal operation. Internal is the oscillator type it uses.
PIC32MX695F512H-80V/PT Features
64-TQFP package
Mounting type of Surface Mount
PIC32MX695F512H-80V/PT Applications
There are a lot of Microchip Technology PIC32MX695F512H-80V/PT Microcontroller applications.
- Entertainment products
- Sonography (Ultrasound imaging)
- Volt meter
- Mobile computers
- Security systems
- Set-top boxes
- Oscilloscopes
- Information appliances (networking of household appliances)
- Tape drives
- Routers
