PIC32MX695F512LT-80I/BG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 121-TFBGA |
| Number of Pins | 121 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 121 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Tin/Copper/Silver (Sn/Cu/Ag) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 80MHz |
| Base Part Number | PIC32MX695F512L |
| Pin Count | 121 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, Ethernet, I2C, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | Ethernet, I2C, SPI, UART/USART, USB OTG |
| Supply Current-Max | 98mA |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of Programmable I/O | 85 |
| Number of UART Channels | 6 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 5 |
| Height | 850μm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX695F512LT-80I/BG Overview
It is available in the 121-TFBGA package for the benefit of saving space. Using Surface Mount, it is mounted. Tape & Reel (TR) is the package that contains it. With a processor of MIPS32? M4K? cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. The device has 83 I/Os. A comparable component can be found by using the base part number PIC32MX695F512L. At BOTTOM, it has its terminals. Currently, it consists of 121 terminationals. Part of the PIC? 32MX series, this electrical component is used in a variety of applications. Using the 3.3V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The structure is constructed from 121 pins. The mounting of this device is carried out following the method of Surface Mount. There are 121 pins on it. This component is a part of Microcontrollers. In the device, there is a memory capacity of 512kB which may be used to store programs and data. In terms of architecture, it is based on PIC. It should be noted that 98mA represents the maximum supply current. The system is highly efficient when working at a frequency of 80MHz. This part is an integral part of the PIC CPU family. There are 85 programmable input/output ports on the chip. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.3V. An oscillator of type Internal is used.
PIC32MX695F512LT-80I/BG Features
121-TFBGA package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX695F512LT-80I/BG Applications
There are a lot of Microchip Technology PIC32MX695F512LT-80I/BG Microcontroller applications.
- Wastewater treatment
- Electromechanical control
- Computed Tomography (CT scan)
- Heart rate monitors
- Copiers
- Projector
- Multi-meter
- Fax machines
- Hand-held metering systems
- Instrument control
