PIC32MX695F512LT-80I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX695F512L |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, Ethernet, I2C, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | Ethernet, I2C, SPI, UART/USART, USB OTG |
| Supply Current-Max | 98mA |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC32MX695F512LT-80I/PT Overview
There is an option to purchase it in the 100-TQFP package, which saves space. In this case, it is mounted using the method of Surface Mount. You can find it in the package of Tape & Reel (TR). Devices with MIPS32? M4K? core processors are available. During work, the temperature should remain at -40°C~85°C TA. It has a type of program memory of FLASH. 85 I/Os are present on the device. It has a part number of PIC32MX695F512L that can be used to locate similar components. QUAD is the position of its terminals on the board. A 100 termination is contained within it. An electrical component such as this is included in the series PIC? 32MX. Because of the 3.3V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A total of 100 pins are required to construct this device. This mount is done in accordance with the method of Surface Mount. It is equipped with 100 pins in total. Subcategory Microcontrollers includes this component. Data and programs may be stored on the devices which have a memory size of 512kB. The architecture of its core is PIC. In this case, 98mA represents the maximum current supply. At a frequency of 80MHz, it exhibits excellent efficiency. A total of 5 timers/counters have been set up. As part of the PIC CPU family, this component is included. Vsup should be kept above 2.3V for normal operation. An oscillator of type Internal is used.
PIC32MX695F512LT-80I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX695F512LT-80I/PT Applications
There are a lot of Microchip Technology PIC32MX695F512LT-80I/PT Microcontroller applications.
- Electronic jamming systems
- Paper shredders
- Heart rate monitors
- Removable disks
- Calculator
- Smoke alarms
- Computed Tomography (CT scan)
- Traditional industrial transformation
- DCS control intelligent sensor
- Binding machines
