PIC32MX775F256H-80I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX775F256H |
| Pin Count | 64 |
| Interface | CAN, Ethernet, I2C, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, Ethernet, I2C, SPI, UART/USART, USB OTG |
| Supply Current-Max | 98mA |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Density | 2 Mb |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of Programmable I/O | 51 |
| Number of UART Channels | 6 |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 5 |
| Number of I2C Channels | 4 |
| Number of SPI Channels | 3 |
| Number of Ethernet Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC32MX775F256H-80I/PT Overview
Due to its space-saving qualities, it is available in the 64-TQFP package. Surface Mount is the way to mount it. It comes in the package?of a Tray. Devices with MIPS32? M4K? core processors are available. When working, the temperature should be kept at -40°C~85°C TA. There is FLASH program memory in it. There are 53 I/Os on the board. Based on its base part number of PIC32MX775F256H, other similarly-sized components can be found. The position of the device is QUAD at terminal. This circuit consists of 64 terminationals. An electrical component such as this is included in the series PIC? 32MX. It is possible to achieve high efficiency with a 3.3V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 64 pins are used in its construction. This mount is done in accordance with the method of Surface Mount. A total of 64 pins are attached to it. It belongs to the subcategory Microcontrollers. In order to store data and programs, the devices have a memory size of 256kB. In terms of architecture, it is based on PIC. 98mA is the maximum supply current. This device works well at 80MHz frequency when it is operating at a high rate of efficiency. This part is an integral part of the PIC CPU family. 51 is the number of programmable I/O. Using an oscillator type of Internal, it works.
PIC32MX775F256H-80I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX775F256H-80I/PT Applications
There are a lot of Microchip Technology PIC32MX775F256H-80I/PT Microcontroller applications.
- Kindle
- Walkie talkies
- Playstation
- Ipad
- Leakage current tester
- Hand-held metering systems
- DCS control intelligent sensor
- Computed Tomography (CT scan)
- Laminators
- Ipod
