PIC32MX775F256L-80V/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX775F256L |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, Ethernet, I2C, RS-232, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, Ethernet, I2C, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Core Architecture | PIC |
| Number of Programmable I/O | 5 |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC32MX775F256L-80V/PF Overview
There is a 100-TQFP package available to save space. In this case, it is mounted using the method of Surface Mount. A package of Tray contains it. Devices with MIPS32? M4K? core processors are available. When working, it is recommended that the temperature be kept at -40°C~105°C TA. FLASH is the type of program memory used by it. There are 85 I/Os on it, which makes it a very simple device. A component with the same part number as PIC32MX775F256L can be compared to other similar components. QUAD is the location of its terminals. It consists of 100 terminationals. Part of the PIC? 32MX series, this electrical component is used in a variety of applications. The supply voltage of 3.3V allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 100 pins are required to construct this device. During the mounting process, the device is mounted based on the Surface Mount method. There are a total of 100 pins on it. Memory size for the devices is 256kB, which can be used to store programs and data. The architecture of its core is PIC. It performs extremely well at a frequency of 80MHz. There are 5 programmable input/output ports on the chip. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.3V. An oscillator of type Internal is used.
PIC32MX775F256L-80V/PF Features
100-TQFP package
Mounting type of Surface Mount
PIC32MX775F256L-80V/PF Applications
There are a lot of Microchip Technology PIC32MX775F256L-80V/PF Microcontroller applications.
- Fabric
- Heater/Fan
- Equipment control
- Volt meter
- Ipad
- Smoke alarms
- Coffee machines
- Smart highways (navigation, traffic control, information monitoring and car service)
- Scanners
- Washing machine
