PIC32MX775F256LT-80V/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX775F256L |
| Pin Count | 100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, Ethernet, I2C, RS-232, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, Ethernet, I2C, SPI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Core Architecture | PIC |
| Number of Programmable I/O | 5 |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX775F256LT-80V/PF Overview
As a result, it is available in the 100-TQFP package. Surface Mount is used for mounting. This item can be found in package Tape & Reel (TR). The device runs in MIPS32? M4K? core processor. The temperature should be kept at -40°C~105°C TA while working. The type of memory in which this program is stored is FLASH. A total of 85 I/Os are available on this device. In order to find similar components, it has a base part number of PIC32MX775F256L. At QUAD, its terminals are located. It has 100 terminationals. This electrical component is part of the PIC? 32MX series. High efficiency is possible due to the 3.3V supply voltage. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. There are 100 pins used in the construction of this device. Based on the Surface Mount method, it is mounted. It is equipped with 100 pins in total. In the device, there is a memory capacity of 256kB which may be used to store programs and data. The core architecture of the system is PIC. It is highly efficient when it works at a frequency of 80MHz. There are 5 programmable I/Os. Normal operation requires a supply voltage (Vsup) that is higher than 2.3V. Using oscillator type Internal makes it work.
PIC32MX775F256LT-80V/PF Features
100-TQFP package
Mounting type of Surface Mount
PIC32MX775F256LT-80V/PF Applications
There are a lot of Microchip Technology PIC32MX775F256LT-80V/PF Microcontroller applications.
- Smartphones-calling, video calling, texting, email
- Xbox
- DDC control
- Air fryers
- Teletext terminals
- Vacuum cleaners
- Wastewater treatment
- Computer/laptop
- Sonography (Ultrasound imaging)
- Projector
