PIC32MX775F512LT-80I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | PIC® 32MX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MX775F512L |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | CAN, Ethernet, I2C, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | MIPS32® M4K™ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, Ethernet, I2C, SPI, UART/USART, USB OTG |
| Supply Current-Max | 98mA |
| Bit Size | 32 |
| Data Converter | A/D 16x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of UART Channels | 6 |
| Height Seated (Max) | 1.2mm |
| Length | 12mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MX775F512LT-80I/PT Overview
A space-saving advantage is that it is included in the 100-TQFP package. It is mounted using the way of Surface Mount. You can find it in the package of Tape & Reel (TR). A MIPS32? M4K? core processor powers the device. Working at -40°C~85°C TA temperature is recommended. The type of memory in which this program is stored is FLASH. There are 85 I/Os on the board. A comparable component can be found by using the base part number PIC32MX775F512L. The terminals of this device are set to QUAD. A 100 termination is contained within it. It is a member of the PIC? 32MX series of electrical components. The supply voltage of 3.3V allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. This device has a total of 100 pins. It belongs to the subcategory Microcontrollers. Data and programs can be stored on the devices with a memory size of 512kB. PIC is its core architecture. A maximum supply current of 98mA is set. The system is highly efficient when working at a frequency of 80MHz. 5 timers/counters are in use. CPU family PIC comprises the part. Normally, the supply voltage (Vsup) should remain above 2.3V. Internal is the oscillator type it uses.
PIC32MX775F512LT-80I/PT Features
100-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MX775F512LT-80I/PT Applications
There are a lot of Microchip Technology PIC32MX775F512LT-80I/PT Microcontroller applications.
- Mice
- Hand-held metering systems
- Set-top boxes
- Laminators
- Missile control
- Calculators
- Smart highways (navigation, traffic control, information monitoring and car service)
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Dishwashers
- Automatic control
