PIC32MZ1024ECH144-I/PH
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-TQFP |
| Surface Mount | YES |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | PIC® 32MZ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MZ1024ECH |
| Operating Supply Voltage | 3.6V |
| Power Supplies | 2.5/3.3V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, I2S, SPI, UART, USART, USB |
| Memory Size | 1MB |
| Oscillator Type | Internal |
| Number of I/O | 120 |
| RAM Size | 512K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | MIPS32® microAptiv™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 1MB 1M x 8 |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, SPI, SQI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 48x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 9 |
| Core Architecture | PIC |
| On Chip Program ROM Width | 32 |
| CPU Family | PIC |
| Number of ADC Channels | 48 |
| Height Seated (Max) | 1.2mm |
| Length | 16mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC32MZ1024ECH144-I/PH Overview
Due to its space-saving qualities, it is available in the 144-TQFP package. It is mounted using the way of Surface Mount. It comes in the package?of a Tray. A core processor of MIPS32? microAptiv? is present in the device. When working, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. A total of 120 I/Os are present. A component with the same part number as PIC32MZ1024ECH can be compared to other similar components. QUAD is the location of its terminals. There are a total of 144 terminations in it. PIC? 32MZ is the series number of this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. A number of 144 pins are used to construct it. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 1MB which may be used to store programs and data. A core architecture of PIC is used. There is 2.5/3.3V power source in this device. This device works well at 200MHz frequency when it is operating at a high rate of efficiency. When 3.6V is employed, designers can fully utilize its adaptability and supply voltage. In total, there are 9 timers and counters. This part is part of the PIC family of CPUs. Internal is the oscillator type it uses.
PIC32MZ1024ECH144-I/PH Features
144-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MZ1024ECH144-I/PH Applications
There are a lot of Microchip Technology PIC32MZ1024ECH144-I/PH Microcontroller applications.
- Robots
- Heater/Fan
- Guidance-GPS
- Electronic jamming systems
- Kindle
- Microwave ovens
- Entertainment products
- Digital cameras
- Gas monitoring systems
- Missile control
