PIC32MZ2048ECG144-I/PL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Surface Mount | YES |
| Number of Pins | 144 |
| Weight | 1.290414g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | PIC® 32MZ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC32MZ2048EC |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | EBI/EMI, Ethernet, I2C, I2S, SPI, UART, USART, USB |
| Memory Size | 2MB |
| Oscillator Type | Internal |
| Number of I/O | 120 |
| RAM Size | 512K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | MIPS32® microAptiv™ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 2MB 2M x 8 |
| Connectivity | EBI/EMI, Ethernet, I2C, SPI, SQI, UART/USART, USB OTG |
| Bit Size | 32 |
| Data Converter | A/D 48x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Rate | 100 Mbps |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 9 |
| Core Architecture | PIC |
| CPU Family | PIC |
| Number of ADC Channels | 48 |
| Number of I2C Channels | 5 |
| Number of SPI Channels | 6 |
| Number of Ethernet Channels | 1 |
| Height | 1.5mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC32MZ2048ECG144-I/PL Overview
Due to its space-saving qualities, it is available in the 144-LQFP package. Surface Mount is used for mounting. This item can be found in package Tray. A MIPS32? microAptiv? core processor powers the device. Maintain a temperature of -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 120 I/Os on the board. A comparable component can be found by using the base part number PIC32MZ2048EC. This device has terminals at QUAD. There are a total of 144 terminations in it. PIC? 32MZ is the series number of this electrical component. By using a 3.3V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. It is constructed using 144 pins. It belongs to the subcategory Microcontrollers. The devices have a memory size of 2MB that can be used to store programs and data. There is PIC core architecture for this system. At a frequency of 200MHz, it exhibits excellent efficiency. In total, there are 9 timers and counters. It belongs to the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 2.3V. It works with an oscillator type Internal.
PIC32MZ2048ECG144-I/PL Features
144-LQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC32MZ2048ECG144-I/PL Applications
There are a lot of Microchip Technology PIC32MZ2048ECG144-I/PL Microcontroller applications.
- Data acquisition and control
- Paper shredders
- Industrial robot
- Smart highways (navigation, traffic control, information monitoring and car service)
- Graphic terminals
- Mobile computers
- DCS control intelligent sensor
- Information appliances (networking of household appliances)
- Broadband technology, video and voice processing
- Teletext terminals
