PIP3201-A,127
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 2001 |
| Series | TOPFET™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIP3201-A |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Temperature (Min) | -40°C |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Power Supplies | 5.5/35V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 20A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 28m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
PIP3201-A,127 Overview
It is package in Tube case.It's included in the TO-220-5 Formed Leads package.This LED driving board is mounted using the mounting type Through Hole.It owns the General Purpose switch type.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.There is a PIP3201-A family of things that it belongs to.A total of 5 terminations have been found in it.The LED driving board has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 20A V.High efficiency is possible when the supply voltage is set to 13V.This LED driver is equipped with a total of 3 pins.The TOPFET? series includes this electrical component.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The maximum supply voltage for this lighting driver is set to 35V (Vsup).Normal operation requires Vsup above 5.5V.This part has a power supply of 5.5/35V.
PIP3201-A,127 Features
Supplied from 13V
PIP3201-A,127 Applications
There are a lot of NXP USA Inc. PIP3201-A,127 Power Switches ICs applications.
- PC Card Hot Swap
- Hard Disk Drives
- Handheld Devices
- Low Voltage I/O System Power
- USB Power Distribution
- USB Power Distribution
- PDAs
- Gaming
- Mobile Communication Devices
- Storage (HDDs, SSDs)
