PIP3208-A,127
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Packaging | Tube |
| Published | 2001 |
| Series | TOPFET™ |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIP3208-A |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Temperature (Min) | -40°C |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 35V |
| Power Supplies | 5.5/35V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 90 μs |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 135m Ω |
| Turn Off Time | 90 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
PIP3208-A,127 Overview
The package is in the form of a Tube.The TO-220-5 Formed Leads package includes it.Through Hole is the mounting type of the LED driver.It owns the General Purpose switch type.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.As you can see, it comes from the PIP3208-A family.A total of 5 terminations have been recorded.It has 1 functions.Its maximum output voltage is 6AV.3 pins are connected to it in total.It is included in the TOPFET? series.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This LED driver is configured to have a maximum supply voltage of 35V (Vsup).To maintain a normal operation, the supply voltage (Vsup) must be maintained above 5.5V.A 5.5/35V power supply is used by the part.
PIP3208-A,127 Features
PIP3208-A,127 Applications
There are a lot of NXP USA Inc. PIP3208-A,127 Power Switches ICs applications.
- PC Card Hot Swap
- Wireless Modem Data Cards
- USB Power Distribution
- Wireless Headsets
- Hot Swap
- USB Ports/Hubs
- HDD and SSD
- Notebook PC
- Telecom and Network Systems
- USB Protection
