PIP401,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab), TO-263CB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | CompactPCI™ High Reliability Power Supply Networks |
| HTS Code | 8542.39.00.01 |
| Voltage - Supply | 6.3V~20V |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIP401 |
| Pin Count | 7 |
| JESD-30 Code | R-PSSO-G6 |
| Qualification Status | Not Qualified |
| Current - Output (Max) | 75A |
| Current - Supply | 3mA |
| FET Type | N-Channel |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | Yes |
| Turn On Time | 10 μs |
| Output Peak Current Limit-Nom | 400A |
| Turn Off Time | 0.3 μs |
| Built-in Protections | TRANSIENT; THERMAL |
| Output Current Flow Direction | SINK |
| Delay Time - OFF | 200ns |
| Delay Time - ON | 7μs |
| Height Seated (Max) | 4.5mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
PIP401,118 Overview
The case that it comes in is called TO-263-7, D2Pak (6 Leads + Tab), TO-263CB case. In Tape & Reel (TR) cases, it is convenient to pack the part. Mounting is done along the Surface Mount-axis. We give it a voltage of 6.3V~20V. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~150°C. It is suitable for the component connected in CompactPCI? High Reliability Power Supply Networks. A N+1 ORing Controller device is categorized as such. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. In this part, there are 6 terminations. 7 pins are used in the design of this product. Using PIP401 as a basis, the part is constructed. Powered by 15V, it is capable of delivering its performance to its customers. As part of the NOT SPECIFIED process, the peak reflow temperature of this part is utilized. It is necessary to run the supply current of the part at 3mA in order to make it work. Under 75A, the output current can conduct through the chip.
PIP401,118 Features
in a TO-263-7, D2Pak (6 Leads + Tab), TO-263CB case
FET Type: N-Channel
6 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
PIP401,118 Applications
There are a lot of NXP USA Inc. PIP401,118 Ideal Diode controller applications.
- Reverse Polarity Protection
- Automotive battery protection
- Industrial transport
- Automotive ADAS systems - camera
- Electricity meters
- MP3 Players
- Modems
- Cell phones
- Alternator
- Building automation
