PKS604FN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-262-7 (Formed Leads), 6 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | PeakSwitch® |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Power (Watts) | 56W |
| HTS Code | 8542.39.00.01 |
| Power Rating | 35W |
| Max Power Dissipation | 56W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T7 |
| Output Voltage | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 725μA |
| Control Features | EN |
| Topology | Flyback |
| Output Current-Max | 1.55A |
| Frequency - Switching | 277kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature |
| Max Duty Cycle | 65 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 4.17mm |
| Length | 10.29mm |
| Width | 8.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
PKS604FN Overview
In the package TO-262-7 (Formed Leads), 6 Leads , the ac to dc converter is embedded.The ac dc converter is available in Tube case.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.In this AC to DC transformer, the switching frequency is 277kHz .There are a total of 7 terminations in it.The ac-dc converter has 3 pins.This AC to DC converter belongs to the PeakSwitch? family of manufacturers.In this AC to DC transformer, the output voltage is 15V .Ac to dc inverters can be powered by up to 1.55A current.There should be no less than 85V voltage across the converter.There is a maximum supply voltage of 265V across the converter.
PKS604FN Features
Packaged with TO-262-7 (Formed Leads), 6 Leads
Switching Frequency at 277kHz
PKS604FN Applications
There are a lot of Power Integrations PKS604FN AC DC Converters applications.
- Automotive Clusters
- White goods
- Industrial controls
- Battery chargers for media tablets
- Battery chargers for cordless
- Records
- Standby power supplies for IR
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- RCC SMPS
- AC/DC Adaptors/Chargers for PDAs
