Parameters |
Mounting Type |
Through Hole |
Package / Case |
TO-262-7 (Formed Leads), 6 Leads |
Surface Mount |
NO |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2007 |
Series |
PeakSwitch® |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
HTS Code |
8542.39.00.01 |
Power Rating |
79W |
Max Power Dissipation |
79W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Pin Count |
3 |
Output Voltage |
15V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
875μA |
Control Features |
EN |
Topology |
Flyback |
Min Input Voltage |
85V |
Output Current-Max |
2.02A |
Frequency - Switching |
277kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
PKS605FN Overview
In the package TO-262-7 (Formed Leads), 6 Leads , the ac to dc converter is embedded.In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.Switching frequency reaches 277kHz Hz.In total, it has 7 terminations.In this ac/dc converter, there are 7 pins.The pins of the ac-dc converter count up to 3 .The product is acdc converter of the PeakSwitch? manufacturer family.Its output voltage is15V .Ac to dc inverters can only be powered at a maximum current of 2.02A .It is possible to read the REACH SVHC standard at: No SVHC .Input voltages under 265V can be used to power the AC to DC converter.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.There is a minimum supply voltage of 85V across the converter.There is a maximum voltage supply across the converter of 265V volts.Input voltage (AC) should be below 265V .
PKS605FN Features
Packaged with TO-262-7 (Formed Leads), 6 Leads
Switching Frequency at 277kHz
With 7 pins
PKS605FN Applications
There are a lot of Power Integrations PKS605FN AC DC Converters applications.
- AC?DC USB chargers for Cameras
- Set-top boxes
- Charger
- Consumer electronics
- Utility meters
- AC-DC Output Power Conversion Applications
- Digital cameras
- Networking
- Standby power supplies for IR
- White goods