Parameters |
Mounting Type |
Through Hole |
Package / Case |
TO-220-7 (Formed Leads), 6 Leads |
Surface Mount |
NO |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2006 |
Series |
PeakSwitch® |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
HTS Code |
8542.39.00.01 |
Power Rating |
30W |
Max Power Dissipation |
79W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Frequency |
277kHz |
Pin Count |
3 |
Output Voltage |
24V |
Max Supply Voltage |
265V |
Min Supply Voltage |
85V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Nominal Supply Current |
25μA |
Control Features |
EN |
Topology |
Flyback |
Min Input Voltage |
85V |
Output Current-Max |
2.02A |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature |
Max Duty Cycle |
65 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
65% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
PKS605YN Overview
This ac to dc converter is embedded in package TO-220-7 (Formed Leads), 6 Leads .The ac dc converter is available in Tube case.As you can see, this AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.There are a total of 7 terminations.In this ac/dc converter, there are 7 pins.There are 3 pins in the ac-dc converter.The AC to DC converter belongs to the manufacturer family of PeakSwitch? .Its output voltage amounts to 24V .A high efficiency is achieved when operating at a frequency of 277kHz .Ac to dc inverters can be powered by up to 2.02A current.SVHC for REACH can be found in the standard No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.In order for the converter to function properly, the supply voltage must be at least 85V .This converter can operate at a maximum supply voltage of 265V .The AC to DC power supply can function with a supply voltage as low as 85V .
PKS605YN Features
Packaged with TO-220-7 (Formed Leads), 6 Leads
With 7 pins
PKS605YN Applications
There are a lot of Power Integrations PKS605YN AC DC Converters applications.
- Air conditioners
- Auxiliary Power Supply
- Humidifier
- Portable Apparatus
- Auxiliary Power Supplies
- Low power ac?dc Adapters for Chargers
- AC/DC Adaptors/Chargers for PDAs
- ATX/BTX Auxiliary Power
- Standby Power Supply
- Power tools fast chargers with trickle and on/off