banner_page

PKS606PN

8 Terminations7 Pin AC to DC power converterPeakSwitch? Series 277kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-PKS606PN
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 270
  • Description: 8 Terminations7 Pin AC to DC power converterPeakSwitch? Series 277kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2006
Series PeakSwitch®
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Power (Watts) 66W
HTS Code 8542.39.00.01
Power Rating 660W
Max Power Dissipation 66W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Pin Count 8
JESD-30 Code R-PDIP-T8
Output Voltage 15V
Analog IC - Other Type SWITCHING CONTROLLER
Nominal Supply Current 1.175mA
Control Features EN
Topology Flyback
Output Current-Max 1.62A
Frequency - Switching 277kHz
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature
Max Duty Cycle 65 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Voltage - Breakdown 700V
Min Supply Voltage (AC) 85V
Height 3.68mm
Length 9.83mm
Width 6.6mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

PKS606PN Overview


There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .At this point, the switching frequency reaches 277kHz .Total terminations are 8 .There are 7 pins on this ac/dc converter.A total of 8 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .A member of the PeakSwitch? manufacturer family, it has the following characteristics.This AC/DC converter produces a voltage of 15V as its output.It is possible to supply the ac to dc inverter with a maximum current of 1.62A .Across the converter, the minimum supply voltage is 85V .There is 265V maximum supply voltage across the converter.

PKS606PN Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 277kHz
With 7 pins

PKS606PN Applications


There are a lot of Power Integrations PKS606PN AC DC Converters applications.

  • Industrial controls
  • Off--line Battery Charger
  • MPS parts
  • Universal Off-Line Power Supplies
  • USB-PD 2.0
  • Consumer electronics
  • Battery Chargers
  • Chargers for cell/cordless phones
  • AC/DC Adaptors/Chargers for PDAs
  • Wall switches

Write a review

Note: HTML is not translated!
    Bad           Good