PL123-05HSC-R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PL123 |
| JESD-30 Code | R-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 134MHz |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.35 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Number of True Outputs | 5 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
PL123-05HSC-R Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 8 terminations in this file. For this clock generator ic, a voltage of 3.3V is required. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. A total of 1 circuits are implemented to access the full performance of the electrical part. The frequency generator has a maximum frequency of 134MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. 3.6V would be the maximum supply voltage for this clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. This clock PLL works with a supply voltage of 3V~3.6V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. You can find related electrical components to the base part number PL123. At maximum 0.25 ns, this analog clock generator has low timing skew. The digital clock generator has 5 high-enable output pins.
PL123-05HSC-R Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
5 true outputs
PL123-05HSC-R Applications
There are a lot of Microchip Technology PL123-05HSC-R Clock Generators applications.
- Electronic countermeasures
- Fiber Channel
- Clock synchronization
- Pagers
- FPGA and processor clocks
- Antenna automatic tracking
- Walkie-talkies
- Televisions
- Melting
- MRI
