PL123-09OC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | PL123 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Frequency (Max) | 134MHz |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:9 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 8.5 ns |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| Number of True Outputs | 9 |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
PL123-09OC Overview
The Tube method is used for packaging clock ICs. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. There are 16 terminations found in the file. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called Clock and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 134MHz. The Surface Mount allows this electrical component to be easily installed on the panel. The maximal supply voltage this clock generator would take is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. This part number PL123 is related to the following electrical components. A 16 pin is available on the clock PLL. The maximal same edge skew (tskwd) can not be exceeded. Analog clock generator is configured with 9 pins that enable the high true output.
PL123-09OC Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
9 true outputs
PL123-09OC Applications
There are a lot of Microchip Technology PL123-09OC Clock Generators applications.
- Digital circuits
- Microprocessor clock multipliers
- CB radios
- Coherent detection of the signal
- DVD recorders
- Local oscillator source in receiver
- PMR (Professional Mobile Radio)
- Symbol synchronization
- Main oscillator in receiver
- Threshold extension
