PL123E-05SC-R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 2.25V~3.63V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PL123 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.25V |
| Number of Circuits | 1 |
| Frequency (Max) | 220MHz |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Propagation Delay (tpd) | 0.2 ns |
| fmax-Min | 220 MHz |
| Number of True Outputs | 5 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PL123E-05SC-R Overview
This clock IC is packaged using the Cut Tape (CT) method. Clock PLL is embedded in the 8-SOIC (0.154, 3.90mm Width) package. This clock generator ic can sustain 260 degrees of temperature during reflowing. 8 terminations can be found in frequency synthesizer. A voltage of 2.5V should be applied to this electronic frequency generator. A clock generator's input is called Clock and it is designed as the input for this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. An upper frequency limit of 220MHz Max can be achieved with this clock-based frequency synthesizer. PLL clock is mounted in the way of Surface Mount. Clock PLL is capable of receiving a maximum of 3.63V as a supply voltage. It is safe to use this frequency synthesizer with a supply voltage above 2.25V. As long as there are 2.25V~3.63V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. PL123 is the base part number for finding related electronic parts. There are 8 pins that are available on the frequency generator. 5 high true output enable pins are available on this clock generator.
PL123E-05SC-R Features
Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 2.5V
5 true outputs
PL123E-05SC-R Applications
There are a lot of Microchip Technology PL123E-05SC-R Clock Generators applications.
- Wi-Fi routers
- Deep space exploration
- Bluetooth transmitters
- Small signal recovery
- Electronic equipment
- Space communucation
- Local oscillator source in receiver
- Infotainment systems
- Skew suppression
- Digital circuits
