PLC810PG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 24 |
| Weight | 3.740011g |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | HiperPLC™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Power (Watts) | 600W |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 700mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Pin Count | 24 |
| Output Type | Voltage |
| Max Output Current | 130mA |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 7mA |
| Voltage - Supply (Vcc/Vdd) | 8.1V~15V |
| Control Features | EN |
| Max Output Voltage | 15V |
| Topology | Half-Bridge |
| Frequency - Switching | 50kHz~300kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Breakdown Voltage | 600V |
| Switcher Configuration | PUSH-PULL |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load, Over Voltage |
| Input Current | 7mA |
| Duty Cycle | 50% |
| Output Isolation | Isolated |
| Voltage - Start Up | 9.1V |
| Length | 31.75mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
PLC810PG Overview
This ac to dc converter is included in the package 24-DIP (0.300, 7.62mm) .The AC/DC power converter type is Tube .A AC/DC converter of this type is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Switching frequency reaches 50kHz~300kHz Hz.Within the range of 8.1V~15V supply voltage (Vcc/Vdd), it can be used.Total terminations are 24 .On the ac/dc converter, there are 24 pins.In this ac-dc converter, there are 24 pins.Currently, it is acdc converter of the manufacturer family of HiperPLC? .As long as AC to DC converter is operated at frequency 100kHz ,it is capable of attaining high efficiency.You can read the standard for REACH SVHC at: No SVHC .The AC to DC converter can be powered under 15V voltage.It is configured with a Voltage output.
PLC810PG Features
Packaged with 24-DIP (0.300, 7.62mm)
Switching Frequency at 50kHz~300kHz
With 24 pins
Output Type : Voltage
PLC810PG Applications
There are a lot of Power Integrations PLC810PG AC DC Converters applications.
- Charger
- AC?DC USB chargers for Tablets
- AC-DC Output Power Conversion Applications
- Rice Cooker
- Low-Voltage I/O System Power
- Automotive Telematics
- Standby Power for General Off-Line Applications
- DVD players
- Air conditioners
- Open Frame Switching Power Supply
