banner_page

PLE0J681MDO1

PLE Series 680μF 6.3V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk


  • Manufacturer: Nichicon
  • Nocochips NO: 555-PLE0J681MDO1
  • Package: Radial, Can
  • Datasheet: -
  • Stock: 698
  • Description: PLE Series 680μF 6.3V Aluminum Polymer Capacitors ±20% Radial, Can Through Hole Bulk (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case Radial, Can
Terminal Shape WIRE
Number of Pins 2
Dielectric Material Aluminium
Operating Temperature -55°C~105°C
Packaging Bulk
Published 2007
Series PLE
Size / Dimension 0.394Dia 10.00mm
Tolerance ±20%
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 2
Termination Radial
ECCN Code EAR99
Type Polymer
Terminal Finish Silver (Ag)
Applications General Purpose
Capacitance 680μF
Voltage - Rated DC 6.3V
Lead Pitch 5mm
Lead Length 19mm
ESR (Equivalent Series Resistance) 5mOhm
Polarity POLARIZED
Lead Spacing 0.197 5.00mm
Lead Diameter 600 μm
Voltage 6.3V
Lifetime @ Temp 2000 Hrs @ 105°C
Leakage Current 857μA
Ripple Current 6.7A
Life (Hours) 2000 hours
Ripple Current @ High Frequency 6.7A @ 100kHz
Dissipation Factor 0.08 %
Ripple Current (AC) 6.7A
Diameter 10mm
Height 13mm
Height Seated (Max) 0.512 13.00mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

The capacitance can run at the range of 680μF.


±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLE series. This part is mounted in the way of Through Hole. The type of the PLE0J681MDO1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLE0J681MDO1 is suitable to conduct the ripple current at 6.7A. PLE0J681MDO1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in PLE0J681MDO1 Capacitor. There are 857μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts. The dielectric materials are defined as Aluminium. There are 2 pins available in the part. The ripple current (AC) can be conducted at 6.7A.

PLE Series


Capacitance: 680μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C

There are great quantities of applications of PLE0J681MDO1 Aluminum Polymer Capacitors.


Typically, PLE0J681MDO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.

  • Computer motherboards
  • DC/DC, DC/AC, and AC/AC converters
  • Decoupling Noise Filtering
  • Voltage Doubling
  • Spot Welding
  • UPS Buffering
  • To reduce power noise & signal noise
  • Motor Start
  • PFC
  • Coupling or blocking

Write a review

Note: HTML is not translated!
    Bad           Good