PLE0J821MDO1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Number of Pins | 2 |
| Dielectric Material | Aluminium |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2007 |
| Series | PLE |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| Capacitance | 820μF |
| Voltage - Rated DC | 6.3V |
| Lead Pitch | 5mm |
| Lead Length | 19mm |
| ESR (Equivalent Series Resistance) | 5mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.197 5.00mm |
| Lead Diameter | 600 μm |
| Voltage | 6.3V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 1.033mA |
| Ripple Current | 6.8A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 6.8A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Ripple Current (AC) | 6.8A |
| Diameter | 10mm |
| Height | 13mm |
| Height Seated (Max) | 0.512 13.00mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLE series. This part is mounted in the way of Through Hole. The type of the PLE0J821MDO1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLE0J821MDO1 is suitable to conduct the ripple current at 6.8A. PLE0J821MDO1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in PLE0J821MDO1 Capacitor. There are 1.033mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts. The dielectric materials are defined as Aluminium. There are 2 pins available in the part. The ripple current (AC) can be conducted at 6.8A.
PLE Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLE0J821MDO1 Aluminum Polymer Capacitors.
Typically, PLE0J821MDO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Spot Welding
- Power Line Buffering
- To enhance power efficiency
- Audio Crossover
- Decoupling Noise Filtering
- Computer motherboards
- Signal decoupling & power bypass
- Motor Start
- Bypassing Noise Filtering
- Coupling or blocking
