PLF0E561MCO1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Packaging | Bulk |
| Tolerance | 20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Silver (Ag) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8532.22.00 |
| Capacitance | 560μF |
| Voltage - Rated DC | 2.5V |
| Terminal Pitch | 3.5mm |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 6mOhm |
| Polarity | POLARIZED |
| Ripple Current | 4.8A |
| Life (Hours) | 2000 hours |
| Dissipation Factor | 0.08 % |
| Current - Leakage | 280μA |
| Diameter | 8mm |
| Height Seated (Max) | 8.9916mm |
| Length | 9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the PLF0E561MCO1 capacitor Nichicon PLF0E561MCO1 is suitable to conduct the ripple current at 4.8A. PLF0E561MCO1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in PLF0E561MCO1 Capacitor. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of PLF0E561MCO1 Aluminum Polymer Capacitors.
Typically, PLF0E561MCO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC Buffering
- UPS Buffering
- Power Factor Correction
- DC/DC, DC/AC, and AC/AC converters
- To enhance power efficiency
- Frequency Converters
- Smoothing Noise Filtering
- PFC
- Coupling or blocking
- Spot Welding
