PLF0E561MCO8
| Parameters | |
|---|---|
| Package / Case | Aluminum |
| Surface Mount | NO |
| Terminal Shape | WIRE |
| Mounting Feature | THROUGH HOLE MOUNT |
| Tolerance | 20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Terminal Finish | Silver (Ag) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8532.22.00 |
| Capacitance | 560μF |
| Voltage - Rated DC | 2.5V |
| Packing Method | Bulk |
| Lead Pitch | 2.5mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | POLARIZED |
| Ripple Current | 5.6A |
| Tan Delta | 0.08 |
| Current - Leakage | 500μA |
| Diameter | 6.3mm |
| Length | 9mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Aluminum. The type of the PLF0E561MCO8 capacitor Nichicon PLF0E561MCO8 is suitable to conduct the ripple current at 5.6A. PLF0E561MCO8 Capacitor The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in PLF0E561MCO8 Capacitor. It has Radial terminations in total. The part is packaged by Bulk. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Aluminum
There are great quantities of applications of PLF0E561MCO8 Aluminum Polymer Capacitors.
Typically, PLF0E561MCO8 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Smoothing Noise Filtering
- Voltage Doubling
- DC Link
- Spot Welding
- Decoupling Noise Filtering
- To enhance power efficiency
- Frequency Converters
- Flashtube Ignition
- Coupling or blocking
- UPS Buffering
