PLF0E681MDO1
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Terminal Shape | WIRE |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Packaging | Bulk |
| Tolerance | 20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Silver (Ag) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8532.22.00 |
| Capacitance | 680μF |
| Voltage - Rated DC | 2.5V |
| Lead Pitch | 3.5mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 6mOhm |
| Polarity | POLARIZED |
| Lead Diameter | 600 μm |
| Voltage | 2.5V |
| Ripple Current | 5.7A |
| Life (Hours) | 2000 hours |
| Dissipation Factor | 0.08 % |
| Current - Leakage | 340μA |
| Diameter | 8mm |
| Height | 12mm |
| Height Seated (Max) | 11.9888mm |
| Length | 12mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 680μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the PLF0E681MDO1 capacitor Nichicon PLF0E681MDO1 is suitable to conduct the ripple current at 5.7A. PLF0E681MDO1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in PLF0E681MDO1 Capacitor. The voltage for the part is specified as 2.5V volts. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 680μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of PLF0E681MDO1 Aluminum Polymer Capacitors.
Typically, PLF0E681MDO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Line Buffering
- Motor Start
- Server motherboards
- Coupling or blocking
- Voltage Doubling
- Frequency Converters
- Spot Welding
- To enhance power efficiency
- Power Factor Correction
- DC/DC, DC/AC, and AC/AC converters
