Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
Radial, Can |
Surface Mount |
NO |
Terminal Shape |
WIRE |
Operating Temperature |
-55°C~105°C |
Packaging |
Bulk |
Series |
PLF |
Size / Dimension |
0.248Dia 6.30mm |
Tolerance |
±20% |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Number of Terminations |
2 |
Termination |
Radial |
ECCN Code |
EAR99 |
Type |
Polymer |
Terminal Finish |
Silver (Ag) |
Applications |
General Purpose |
HTS Code |
8532.22.00 |
Capacitance |
820μF |
Voltage - Rated DC |
2.5V |
Lead Pitch |
2.5mm |
ESR (Equivalent Series Resistance) |
7mOhm |
Polarity |
POLARIZED |
Lead Spacing |
0.098 2.50mm |
Lifetime @ Temp |
2000 Hrs @ 105°C |
Leakage Current |
500μA |
Ripple Current |
5.6A |
Tan Delta |
0.08 |
Ripple Current @ Low Frequency |
280mA @ 120Hz |
Ripple Current @ High Frequency |
5.6A @ 100kHz |
Diameter |
6.3mm |
Height Seated (Max) |
0.374 9.50mm |
Length |
9mm |
RoHS Status |
RoHS Compliant |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF0E821MCO8 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF0E821MCO8 is suitable to conduct the ripple current at 5.6A. PLF0E821MCO8 Capacitor The typical values of Voltage - Rated DC are 2.5V. There are 2 terminals embeded in PLF0E821MCO8 Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLF Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF0E821MCO8 Aluminum Polymer Capacitors.
Typically, PLF0E821MCO8 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Signal decoupling & power bypass
- Coupling or blocking
- Bypassing Noise Filtering
- Decoupling Noise Filtering
- To reduce power noise & signal noise
- DC Link
- PFC
- Frequency Converters
- Motor Start
- To enhance power efficiency