PLF0E821MCO8TD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2015 |
| Series | PLF |
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 820μF |
| Voltage - Rated DC | 2.5V |
| Lead Pitch | 2.4892mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | Polar |
| Lead Spacing | 0.098 2.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 500μA |
| Ripple Current | 5.6A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.6A @ 100kHz |
| Height Seated (Max) | 0.354 9.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 820μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF0E821MCO8TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF0E821MCO8TD is suitable to conduct the ripple current at 5.6A. PLF0E821MCO8TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 2.5V. PLF0E821MCO8TD Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLF Series
Capacitance: 820μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF0E821MCO8TD Aluminum Polymer Capacitors.
Typically, PLF0E821MCO8TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- To enhance power efficiency
- PFC
- Power Line Buffering
- Motor Control
- Audio Crossover
- Coupling or blocking
- Signal decoupling & power bypass
- Motor Start
- DC Buffering
