PLF0G122MDO1TD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Published | 2015 |
| Series | PLF |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 1200μF |
| Voltage - Rated DC | 4V |
| Lead Pitch | 5.0038mm |
| ESR (Equivalent Series Resistance) | 8mOhm |
| Polarity | Polar |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 960μA |
| Ripple Current | 5.6A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.6A @ 100kHz |
| Height Seated (Max) | 0.512 13.00mm |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 1200μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF0G122MDO1TD capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF0G122MDO1TD is suitable to conduct the ripple current at 5.6A. PLF0G122MDO1TD Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 4V. PLF0G122MDO1TD Capacitor. There are 960μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLF Series
Capacitance: 1200μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF0G122MDO1TD Aluminum Polymer Capacitors.
Typically, PLF0G122MDO1TD is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Frequency Converters
- Voltage Doubling
- Motor Control
- Signal decoupling & power bypass
- Power Line Buffering
- Bypassing Noise Filtering
- To reduce power noise & signal noise
- Lighting Ballast
- UPS Buffering
- Coupling or blocking
