PLF0J471MDO1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | PLF |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 470μF |
| Voltage - Rated DC | 6.3V |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 7mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 600 μm |
| Voltage | 6.3V |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 592μA |
| Ripple Current | 5.5A |
| Life (Hours) | 2000 hours |
| Ripple Current @ High Frequency | 5.5A @ 100kHz |
| Dissipation Factor | 0.08 % |
| Diameter | 8mm |
| Height | 12mm |
| Height Seated (Max) | 0.472 12.00mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 470μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF0J471MDO1 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF0J471MDO1 is suitable to conduct the ripple current at 5.5A. PLF0J471MDO1 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in PLF0J471MDO1 Capacitor. There are 592μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The voltage for the part is specified as 6.3V volts.
PLF Series
Capacitance: 470μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF0J471MDO1 Aluminum Polymer Capacitors.
Typically, PLF0J471MDO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC Buffering
- Bypassing Noise Filtering
- Decoupling Noise Filtering
- Audio Crossover
- UPS Buffering
- Frequency Converters
- Coupling or blocking
- DC Link
- Smoothing Noise Filtering
- PFC
