PLF1A151MDL4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~105°C |
| Packaging | Bulk |
| Published | 2009 |
| Series | PLF |
| Size / Dimension | 0.248Dia 6.30mm |
| Tolerance | ±20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Type | Polymer |
| Terminal Finish | Silver (Ag) |
| Applications | General Purpose |
| HTS Code | 8532.22.00 |
| Capacitance | 150μF |
| Voltage - Rated DC | 10V |
| Lead Pitch | 2.5mm |
| ESR (Equivalent Series Resistance) | 25mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.098 2.50mm |
| Lifetime @ Temp | 2000 Hrs @ 105°C |
| Leakage Current | 0.3mA |
| Ripple Current | 2.9A |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.08 |
| Ripple Current @ High Frequency | 2.9A @ 100kHz |
| Diameter | 6.3mm |
| Height | 10.5mm |
| Height Seated (Max) | 0.413 10.50mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 150μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Bulk packaging. It belongs to PLF series. This part is mounted in the way of Through Hole. The type of the PLF1A151MDL4 capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Nichicon PLF1A151MDL4 is suitable to conduct the ripple current at 2.9A. PLF1A151MDL4 Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 10V. There are 2 terminals embeded in PLF1A151MDL4 Capacitor. There are 0.3mA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total.
PLF Series
Capacitance: 150μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Bulk
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of PLF1A151MDL4 Aluminum Polymer Capacitors.
Typically, PLF1A151MDL4 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- To enhance power efficiency
- Decoupling Noise Filtering
- To reduce power noise & signal noise
- UPS Buffering
- Audio Crossover
- Motor Start
- Coupling or blocking
- DC Link
- Voltage Doubling
- Frequency Converters
