PLF1C181MDO1
| Parameters | |
|---|---|
| Package / Case | Aluminum |
| Surface Mount | NO |
| Terminal Shape | WIRE |
| Mounting Feature | THROUGH HOLE MOUNT |
| Tolerance | 20% |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| Termination | Radial |
| ECCN Code | EAR99 |
| Terminal Finish | Silver (Ag) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8532.22.00 |
| Capacitance | 180μF |
| Voltage - Rated DC | 16V |
| Packing Method | Bulk |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 9mOhm |
| Polarity | POLARIZED |
| Ripple Current | 5A |
| Tan Delta | 0.08 |
| Current - Leakage | 576μA |
| Diameter | 8mm |
| Length | 12mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 180μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Aluminum. The type of the PLF1C181MDO1 capacitor Nichicon PLF1C181MDO1 is suitable to conduct the ripple current at 5A. PLF1C181MDO1 Capacitor The typical values of Voltage - Rated DC are 16V. There are 2 terminals embeded in PLF1C181MDO1 Capacitor. It has Radial terminations in total. The part is packaged by Bulk. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C.
Series
Capacitance: 180μF
Tolerance: 20%
Package / Case: Aluminum
There are great quantities of applications of PLF1C181MDO1 Aluminum Polymer Capacitors.
Typically, PLF1C181MDO1 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- Audio Crossover
- DC/DC, DC/AC, and AC/AC converters
- Frequency Converters
- Signal decoupling & power bypass
- Spot Welding
- Coupling or blocking
- Flashtube Ignition
- Motor Control
- Lighting Ballast
